RING 21 (6.5) RIB EVINRUDE ETEC 150 AND TRAILER
£13,999.00
Here we have a Mike Ring 6.50 Rib together with a 2014 Evinrude Etec 150.
These Rib are renowned for there incredible sea handling capabilities.
The Rib is all round good condition. The hull has been antifouled. The Rib was re-tubbed in 2009 and the tubes are in good condition.
The layout is 2 X double jockey seat with a rear bench seat and double console and suicide seat. The upholstery is trimmed in black with red piping. Front anchor locker. The engine was bought new from us in 2014. The trailer has had the brakes disconnected and is a Bramber roller coaster. The boat is also fitted with hydraulic steering. Console cover.
Related products
-
Orkney 440 cuddy fishing boat with Mercury 15hp and trailer SOLD
Sale!
£3,999.00Here we have a very popular coastal fishing boat all ready to go.
The boat is a good condition for its age but does have aged related marks and small repairs to fittings holes.
The boat has a new front plexiglass fitted and a fresh coat of antifoul. The Mercury MFS15 four stroke electric start engine has just had a full service by ourselves.
It also comes with Indespension bucked trailer new wheels and bearings.
The cover has had all new elastic fitted for a great fit.
All in all this is a great example of a superb fishing boat it has some age related marks hence the great price!!
Viewing strictly by appointment at Ash Marine Devon 07768470151
Below is the manufactures description from new.
- LOA 14'4" 4.37m.
- Beam 5'8" 1.73m.
- Hull Weight 440 lbs 200 kg.
- Max HP. Maximum 20 hp - Long shaft Tiller steer model available maximum 15hp Long shaft.
- Design Speed. Max design speed 22 knots / Optimum design speed 14 Knots.
- Max Persons. 4
- Max Load. 335 kg.
- Design Category. C.
Speed Max design speed 22 knots Optimum design speed 14 knots Performance Indicator 8.5 knots 17 knots 22 knots construction Standard boat in hand laminated GRP with hull and deck ‘wet bonded’. Full built in buoyancy. Anchor well forward with stowage under. GRP aft seats, centre thwart with locker and forward seats with side benches. Lockable fuel tank stowage. Anodised alloy mooring cleats and bow roller. Inner and outer transom plates with alloy capping. Internal edge trim. Tough all-round fender. Galvanised rowlocks. Stainless steel winching eye and keel band. Includes console with wheel steering for through pivot motors. construction Standard boat in hand laminated GRP with hull and deck (wet bonded). Full built in buoyancy. Anodised alloy mooring cleats and bow roller. Stainless steel bow eye and keel band. Varnished hardwood thwart. Anchor well forward with stowage under. Internal edge trim. Tough all-round fender. Galvanised rowlocks. Inner and outer transom plates with alloy capping. Custom version also available
-
SUZUKI DF250AUN
DF250AUN | POWER. PERFORMANCE. PERFECTION.
Part of the 'KURO' series of outboard motors, a Japanase word for 'deep black'. Featuring a new cowling design with re-worked air intake louvres to provide better air supply and cooling, and new electronic mapping which increases the rev range to 5,700rpm - 6,000rpm.
Suzuki Precision Control
This technologically advanced system gives smooth, precise control with crisp, immediate shifting particularly at low revs when manoeuvring and helps improve fuel efficiency.
Variable Valve Timing (VVT)
The system is controlled by hydraulic pressure from the oil pump and the process happens automatically so all you have to do is enjoy the power and performance.
Suzuki Lean Burn control System
Shaft Length
Extra Long (635mm)
Colour
Pearl Nebular Black
Steering Type
Remote
Tilt
Power
Starter
Electric
Weight
290
DIMENSIONS AND WEIGHTS
Recommended transom heightX: 635mm (25in)
Weight:X: 290kgBore x Stroke:98 x 89mmPropeller Selection (pitch):15" - 27.5ENGINE SPECIFICATIONStarting System:ElectricEngine Type:DOHC 24-ValveFuel Delivery System:Multi-Point Sequential Electronic Fuel InjectionNo. of Cylinders:V6 (55-degree)Piston Displacement:4,028ccMaximum Output:184kw
Full Throttle Operating Range:5,700 - 6,000
Steering:RemoteOil Pan Capacity:8.0LIgnition System:Fully-transistorisedAlternator:12V 54AEngine Mounting:Shear MountTrim Method:Power Trim and TiltGear Ratio:2.08:1Gear Shift:F-N-RExhaust:Through Prop Hub Exhaust -
HYDROSPORT 565 Sports Ribs Suzuki DF90 and trailer
Sale!
£18,950.00Here we have a Hydrosport 565 2018 sold in 2019 with a Suzuki DF90 ATL and bunked trailer.
The Hydrosport is a fantastic performing rib able to handle our U.K waters. Build with the latest technology in boat building, wood free construction. The material used is Orca Hypalon Carbon : a favourite in the leisure boat market, gives off a satin shine in the light, durable, and stylish. Hull Construction made from LLoyds approved Fiberglass. Fitted with Suzuki's DF90 ATL.
The 565 Leisure has a deep V hull that provides a smooth ride in rough water conditions.
The 565 metre rib is made to order in a large choice of colourways, according to your specifications with your choice of seats and console.
With the extremely deep V-hull in the bow the 565 offers comfort and safety even in the hardest conditions. In most ribs of equivalent size you will feel beaten up after 8 hours at sea. In a 565 leisure rib after 8 hours at sea, you feel like going for dinner! Besides the soft ride of a leisure rib, it has also a very dry ride that really has to be experienced to be fully appreciated.
Specification
LOA: 5.65 metre
Beam: 2.27 metres
Tube diameter: 0.47 metres
Weight: from 260kg
Passengers: 10
Recommended engine: 25-90 hp
Weight Capacity: >700kg
Fuel capacity: 90 Litre optional
Autonomy: >150nm
Hull type: Warped 24º V @ transom, single stepped VFi
Standard Features
Full Orca Hypalon material
Rear stainless steel boarding ladder
Anti-slip deck surface
Large bow locker
Single stepped hull
4 X hard rubber cleats
2 X Ski eyes
Glued tube to deck protection
Hard rubbing strake
