RING 21 (6.5) RIB EVINRUDE ETEC 150 AND TRAILER SOLD
£16,999.00 Original price was: £16,999.00.£13,999.00Current price is: £13,999.00.
Here we have a Mike Ring 6.50 Rib together with a 2014 Evinrude Etec 150.
These Rib are renowned for there incredible sea handling capabilities.
The Rib is all round good condition. The hull has been antifouled. The Rib was re-tubbed in 2009 and the tubes are in good condition.
The layout is 2 X double jockey seat with a rear bench seat and double console and suicide seat. The upholstery is trimmed in black with red piping. Front anchor locker. The engine was bought new from us in 2014. The trailer has had the brakes disconnected and is a Bramber roller coaster. The boat is also fitted with hydraulic steering. Console cover.
Related products
-
SUZUKI DF250AUN
DF250AUN | POWER. PERFORMANCE. PERFECTION.
Part of the 'KURO' series of outboard motors, a Japanase word for 'deep black'. Featuring a new cowling design with re-worked air intake louvres to provide better air supply and cooling, and new electronic mapping which increases the rev range to 5,700rpm - 6,000rpm.
Suzuki Precision Control
This technologically advanced system gives smooth, precise control with crisp, immediate shifting particularly at low revs when manoeuvring and helps improve fuel efficiency.
Variable Valve Timing (VVT)
The system is controlled by hydraulic pressure from the oil pump and the process happens automatically so all you have to do is enjoy the power and performance.
Suzuki Lean Burn control System
Suzuki's Lean Burn Fuel Control Technology predicts fuel needs according to operating conditions, then delivers the optimum fuel/air mixture to the engine resulting in greater fuel economy.
Shaft Length
Extra Long (635mm)
Colour
Pearl Nebular Black
Steering Type
Remote
Tilt
Power
Starter
Electric
Weight
290
DIMENSIONS AND WEIGHTSRecommended transom heightX: 635mm (25in)
Weight:X: 290kgBore x Stroke:98 x 89mmPropeller Selection (pitch):15" - 27.5ENGINE SPECIFICATIONStarting System:ElectricEngine Type:DOHC 24-ValveFuel Delivery System:Multi-Point Sequential Electronic Fuel InjectionNo. of Cylinders:V6 (55-degree)Piston Displacement:4,028ccMaximum Output:184kw
Full Throttle Operating Range:5,700 - 6,000
Steering:RemoteOil Pan Capacity:8.0LIgnition System:Fully-transistorisedAlternator:12V 54AEngine Mounting:Shear MountTrim Method:Power Trim and TiltGear Ratio:2.08:1Gear Shift:F-N-RExhaust:Through Prop Hub Exhaust -
Orkney 440 cuddy fishing boat with Mercury 15hp and trailer SOLD
Sale!
£4,999.00Original price was: £4,999.00.£3,999.00Current price is: £3,999.00.Here we have a very popular coastal fishing boat all ready to go.
The boat is a good condition for its age but does have aged related marks and small repairs to fittings holes.
The boat has a new front plexiglass fitted and a fresh coat of antifoul. The Mercury MFS15 four stroke electric start engine has just had a full service by ourselves.
It also comes with Indespension bucked trailer new wheels and bearings.
The cover has had all new elastic fitted for a great fit.
All in all this is a great example of a superb fishing boat it has some age related marks hence the great price!!
Viewing strictly by appointment at Ash Marine Devon 07768470151
Below is the manufactures description from new.
- LOA 14'4" 4.37m.
- Beam 5'8" 1.73m.
- Hull Weight 440 lbs 200 kg.
- Max HP. Maximum 20 hp - Long shaft Tiller steer model available maximum 15hp Long shaft.
- Design Speed. Max design speed 22 knots / Optimum design speed 14 Knots.
- Max Persons. 4
- Max Load. 335 kg.
- Design Category. C.
Speed Max design speed 22 knots Optimum design speed 14 knots Performance Indicator 8.5 knots 17 knots 22 knots construction Standard boat in hand laminated GRP with hull and deck ‘wet bonded’. Full built in buoyancy. Anchor well forward with stowage under. GRP aft seats, centre thwart with locker and forward seats with side benches. Lockable fuel tank stowage. Anodised alloy mooring cleats and bow roller. Inner and outer transom plates with alloy capping. Internal edge trim. Tough all-round fender. Galvanised rowlocks. Stainless steel winching eye and keel band. Includes console with wheel steering for through pivot motors. construction Standard boat in hand laminated GRP with hull and deck (wet bonded). Full built in buoyancy. Anodised alloy mooring cleats and bow roller. Stainless steel bow eye and keel band. Varnished hardwood thwart. Anchor well forward with stowage under. Internal edge trim. Tough all-round fender. Galvanised rowlocks. Inner and outer transom plates with alloy capping. Custom version also available
-
Ryds 475 Sports boat Suzuki DF50 SOLD
Sale!
£7,500.00Original price was: £7,500.00.£6,850.00Current price is: £6,850.00.Note: The boat is located at Ash Marine viewing by appointment.
Ryds 475 GT in nice & well-maintained condition, Fitted with Garmin GPS Chartplotter.
Suzuki DF50HP 4-stroke from 2006.
Boat's equipment: 700 Kg trailer, Cushions on the steering chairs .
Hull type Fibreglass
Length 4.80 Beam 1.95 Depth 0.40 Motor & technic Engine Suzuki DF 50
Ryds
Ryds began to take shape as early as 1946, with the goal of creating joy-spreading products that open the door to nature, encourage adventure and create community. Determination and focus on quality, safety and function have led us to where we are today - a modern boat factory with dealers all over Sweden. We are very proud that Ryds has developed into one of the boat world's most modern boat manufacturers.